Skip to the navigation Skip to the content

Slug Pellet Spreader Calibration Wizard

 

 

The maximum spread width of each spreader is only obtainable in Ideal Conditions. Consideration of the wind speed and field terrain must be taken into account.

In more common moderate conditions, Single Disc spreaders will only spread reliably to between 18m and 20m.

 

Information provided in the calibration tool is intended solely as a guide and Certis provides no warranty whatsoever, either express or implied, that the calibration wizard will be accurate, achieve any particular result or be fit for your intended purpose. Settings may vary depending on the individual machine used. Always ensure your machine is calibrated before use. If in doubt contact the manufacturer. Where possible, slug pellets should only be used as part of an integrated approach to slug control.

Settings shown are obtained from trials carried out in partnership with SCS Spreader & Sprayer Testing. To the fullest extent permitted by law, Certis excludes any and all liability for use by a customer or potential customer of the calibration wizard tool, or for any reliance on the calibration wizard tool.

Please refer to the website Terms and Conditions for further information.

Settings shown are obtained from trials carried out in partnership with SCS Spreader & Sprayer Testing.